Youtube daily make Jun 4 2017

OUR WEBSITE : http://justhealthrelated.com/

Today we're going to present a few amazing tips that will help you reduce your waist

size in no time.

Losing belly fat is a difficult process – it requires a lot of hard work and dedication

and may take a lot of time some people just don't have.

However, there are shortcuts – these few tips will boost your metabolism and burn your

belly fat in just a short time!

DRINK PLENTY OF WATER Drinking the proper amount of water is very

important for losing weight.

According to experts, you need to drink at least half a liter of water before your meals

every day.

Water will keep your metabolism running properly and reduce your cravings, which is essential

for losing weight.reduce lower belly fat

EXERCISE

If you want to reduce your waist size, you need to exercise regularly.

You don't need much of it – just find some appropriate exercises and do them 5 times

a week for best results.

See the video below for more details:

AVOID SUGAR AND DESSERTS

Yes, everyone loves desserts much, but sugar is your enemy when trying to lose weight.

For the sake of your figure, you need to avoid desserts and sugary treats.

It's ok to eat them sometimes, but consuming sugar frequently won't do your figure and

health any good.

Watch the video to learn more about the tips and follow them to make your dreams come true!

Don't Forget To Follow Us On Other Social Media :

INSTAGRAM: http://bit.ly/2m7bnd1 FACEBOOK: http://bit.ly/2kYKuD0

TWITTER: http://bit.ly/2l74mVA PINTEREST: http://bit.ly/2lEUYvn

Subscribe our channel for more!

For more infomation >> HOW TO REDUCE YOUR WAIST SIZE WITHOUT DIETING! THIS WILL MAKE YOUR DREAMS COME TRUE! - Duration: 1:21.

-------------------------------------------

Mashumaro tries to make donuts - Duration: 3:48.

Howdy~ First combine flour, sugar, yeast and salt in a bowl.

3 1/4 cups of plain flour

1/4 cup of caster sugar.

Now 3 teaspoons of dried yeast. It smells weird...

Ah! also a pinch of salt!

Next, warm 1 cup of milk. Make it warm, not hot.

I like to mix it a little to ensure there are no cold spots.

Next, add your 100g of butter to the warm milk.

Return it to the microwave, for 30 seconds.

Tada! now mix it through.

Mix mix mix

So yellow~~~

Now for the 3 eggs, try your best to separate the yolks from the whites.

Add the 3 yolks and then the milk/butter combo.

Now get in there and mix it with all your might!

RAAAAGHHH!! MIX!!

KEEP GOING!

... and going...

It should look smooth and thick.

Make sure to cover your bench in flour.. lots of it~

Knead it like crazy

Place it in a lined bowl.

It might look weird like this. But don't worry!

Now cover it tightly in cling wrap.

Set it aside for 1 hour and 30 mins.

Play with the flour while you wait.

Now it should have doubled in size! So knead it alot, give it a lovely massage.

Time to roll it into a 1cm thick sheet of dough o3o)

Use an 8cm round cutter to cut out discs. Use a 3.5cm round cutter to cut out centers.

... don't forget to cut those holes... Seriously.

You can also roll the left overs out to make more donuts.

Amazing~~~

roll roll roll

Now.. don't be like me, make sure to have a deep pot/wok/frying pan of oil.

and control the heat...

Combine extra sugar and cinnamon on a tray or plate. Coat both sides of the donut.

For more infomation >> Mashumaro tries to make donuts - Duration: 3:48.

-------------------------------------------

How to Make a Paper Boat/Ship(Floating)-Canoe-Easy Origami Inspired Tutorials/Instruction-DIY-Crafts - Duration: 2:44.

Paper Ship

Paper boat

Very Easy to make

For more infomation >> How to Make a Paper Boat/Ship(Floating)-Canoe-Easy Origami Inspired Tutorials/Instruction-DIY-Crafts - Duration: 2:44.

-------------------------------------------

How to make paper karambit tiger tooth PL - Duration: 20:19.

For more infomation >> How to make paper karambit tiger tooth PL - Duration: 20:19.

-------------------------------------------

(Salmonella outbreak 2017) They're cute, but those babies can make you sick - Duration: 1:24.

(Salmonella outbreak 2017) They're cute, but those babies can make you sick

Sixteen people in Washington have been diagnosed with Salmonella after coming into contact

with live poultry, according the state Department of Health.

Cases were confirmed in Lewis, Mason, Grays Harbor, Pierce, Chelan, Clark, Cowlitz, King,

Kitsap, Kittitas, Snohomish, Yakima and Whatcom counties.

Five people were hospitalized, and no deaths have been reported.

Seven of the people infected are children under age 5.

The chicks and ducklings came from several sources including feed supply stores, hatcheries,

websites and relatives.

Health officials recommend that people who own or handle chicks and ducklings wash their

hands thoroughly with soap and water after touching them or anything in the area they

live and roam.

Children under 5, adults over 65 and people with weakened immune systems are urged to

avoid touching live poultry, health officials say.

"Salmonella is a bacteria that causes intestinal illness in people," Thurston County Health

Officer Dr. Rachel Wood wrote in a recent column for The Olympian.

"It lives in the intestines of animals as diverse as cattle, pigs, iguanas and chickens.

It is spread through feces."

For more infomation >> (Salmonella outbreak 2017) They're cute, but those babies can make you sick - Duration: 1:24.

-------------------------------------------

How to Make a Perfect Chocolate Ganache (ENG SUBS) - Duration: 2:36.

Chop the chocolate with a knife, rocking knife or a food processor. You can also grate it.

The more chopped/grated is, the better it will melt and the ganache will be smoother too.

Mix in with the whipping cream and stir it. Take it to the microwave for 30 seconds. If you don't have a microwave you can use a double boiler instead.

Remove from the microwave and stir again. Microwave it again, this time for 20 seconds.

Again remove and stir it until uniforms. And take it back to the microwave for 10 seconds.

If the mixture still have lumps you can microwave it every 10 seconds each time. Don't forget to stir between each burst.

My Ganache took more 10 seconds to be this smooth. When your ganache have this texture then it's ready to use.

If you want a more liquid ganache then use 200ml of whipping cream instead of the 100ml.

The ganache is ready to use. You don't need to take it to the fridge in order to ganache your cake, the ganache will harden when it gets in touch with the cake's surface.

And it's more easy to apply it when it is still liquid.

Thank you for watching. Subscribe the channel for more videos. Like.

For more infomation >> How to Make a Perfect Chocolate Ganache (ENG SUBS) - Duration: 2:36.

-------------------------------------------

Palak ki Tikki Recipe - How to make Crispy & Tasty Palak ke Pakore in Hindi - Indian Snack Recipe - Duration: 5:47.

Today I'm going to make a very tasty and crispy spinach snack recipe

Kids love this tikki

Lets start making palak ki tikki

For making palak ki tikki, we'll need

Spinach - 2 handful, washed and chopped

Boiled Potatoes - 2, peeled

Gram flour (Besan) - 3/4 cup

Salt - 1 tsp, adjust to taste

Carom Seeds - 1/4 tsp

Coriander Seeds - 1 tsp, crushed

Garam Masala Powder - 1/4 tsp

Red chilly powder - 1/2 tsp

Cilantro - 2 tbsp, chopped

Green Chillies - 2, chopped

Mint leaves - 15 - 20, washed and chopped

Oil for frying

Lets start making palak ki tikki

Take besan in a large bowl

Add all the spices

Mix well

Mash the boiled potatoes

Add potatoes to the besan mixture

Add cilantro, mint leaves and green chillies

Add spinach

Mix well. We won't need to add extra water since spinach already has enough water content

Mint leaves give it a very nice aroma and flavour

You can also add 1 tsp dry pomegranate seeds

Make a tight dough

Apply oil on your palms

Make lemon sized balls of this dough and flatten with your palms

Similarly make all the balls

Heat oil in a pan

Oil is heated, turn gas to low

Put tikki in hot oil

Turn gas to little higher

Keep it on medium flame

Flip them often and fry till golden brown

You can also shallow fry these tikki

Turn gas to lower

It has turned nice golden brown, take it out onto a paper napkin

Similarly make all the palak ki tikki

Palak ki tikki is ready, It is very tasty

You can serve it as starter or tea time snack

It can be served with sweet and sour chutney, green chutney or tomato sauce

Thanks for watching Palak ki Tikki

For more infomation >> Palak ki Tikki Recipe - How to make Crispy & Tasty Palak ke Pakore in Hindi - Indian Snack Recipe - Duration: 5:47.

-------------------------------------------

Πως να φτιάξω καφέ στο σπίτι( how to make coffee at home) - Duration: 4:50.

For more infomation >> Πως να φτιάξω καφέ στο σπίτι( how to make coffee at home) - Duration: 4:50.

-------------------------------------------

Message to President Emmanuel Macron -Make Democracy Great Again - Duration: 1:01.

Mr. President of France

Monsieur le président

Let's introduce an International Democracy Diploma

Nowadays to drive a car you need a diploma

But to drive a country you don't need one

Let's introduce this diploma for candidates politicians

to ensure that except their specialty

they know how society works

they know the basics of economics and law

the basics of energy and environment

agriculture and animal production

public health

education

telecommunications

IT-information technology

transportation

let's fix this bug

make great democracy again

For more infomation >> Message to President Emmanuel Macron -Make Democracy Great Again - Duration: 1:01.

-------------------------------------------

Recipe #3: How to make Chicken Curry | Homemade | With Marination | English - Duration: 4:41.

For marination

Take the chicken in a bowl

Add turmeric powder

Add some salt as per your taste

Add the ginger-garlic paste

Basically, we're adding all the other masalas..

..except for garam masala which will be added at the end

Add the jeera powder similarly

Add the dhaniya powder as well

Now the black pepper powder

We'll mix it well so the chicken pieces are evenly coated

If you want to make it spicy, you can add some red chili powder

Mix it, and we'll keep it aside for at least half an hour

For the final cooking process

Heat some oil in a kadhai

I have used mustard oil here, you can use any oil of your choice

Add jeera to it

Let it splutter

Add the bay leaves and red chilies

This gives it a nice flavour

Once they become a little dark, we'll add the onions

We'll cook it till the onions become slightly brown

Keep stirring it

As you can see, the onions have become translucent now

So, we'll add our chicken pieces

Add the remaining turmeric powder

Add some water, so the ingredients are mixed well

Cook the chicken on medium flame for half an hour

Alternate between covering it and stirring..

..as and when needed

Finally, we'll add the garam masala

Now the chicken is ready to serve.

You can serve it with rice or roti

For more infomation >> Recipe #3: How to make Chicken Curry | Homemade | With Marination | English - Duration: 4:41.

-------------------------------------------

How To Make a Mini Dremel Cutter || DIY Dremel Tool Accessories - Duration: 6:19.

Welcome to my videos

take a COCACOLA cape and open a rubber into cape inside

round this cape by plass and hammer

and cut to whole round like as triangle ( SUBSCRIBE please)

hold this cap by PIN

take a wood and setup all parts like as video

and join the all parts use soldering Iron

used a usb cable and join to the dc motor and scuic ( SUBSCRIBE please)

Use a hot glue or differant glue

TESTING

Subscribe for more,Please Please subscribe,subscribe,subscribe,Thanks for watching

For more infomation >> How To Make a Mini Dremel Cutter || DIY Dremel Tool Accessories - Duration: 6:19.

-------------------------------------------

How to make doilies/lace/cute decorations - Duration: 7:58.

Hi everyone! How are you guys?

Rina's back with a new tutorial!

Today's going to be very short.

Some of you may have already watched a tutorial where I show you how to make simple backgrounds with some decorative elements and textures

Today I'm going to show you how to make one of those decorative elements which are called Doilies

Keep watching the video if you want to discover a very easy and funny method to make your own ones.

But first of all let's get some info. What are doilies? ~

Doilies are basically this kind of circular patterns

with many lace around them

or little inner decorations like hearts, stars, moons...

You know those tabletcloth many grandmas like to put on the table? Well that's it.

You can find many of them if you browse around the internet

but as usual, sometimes it will be...

hard to find them, or you don't like the ones you find, or they won't fit into your picture or whatever other obstacle.

So why don't we get rid of all these problems and just make or own ones?

I can already hear people saying

"But Rina... this look so complicated and hard to draw... I bet it takes a long time..."

Fear not, my dears. It will only take you 30 seconds. I promise!

You'll see, let's open our drawing program. It can be SAI, Clip Studio, Photoshop...

Whatever it's best for you. This should work in most of the programs we can find nowadays.

Let's open a new canvas. If possible make it as big as you can so we avoid lines getting pixelated along the process.

New canvas...

3000 x 3000 pixels for example...

Now that we have our new canvas let's just write a random word

I'm gonna try with my name ~

You guys can try with yours and see the result later ~

Pick whatever tool that you most like.

And let's write it in very big letters.

Ri---

--na.

//Sorry, my handwritting is awful :'D

What are we going to do now?

We'll just duplicate the layer

Press Ctrl+T on your keyboard to transform it

(to transform the new layer I mean!)

And now on your drawing program pick the option that allows you to flip the layer to one of the sides

it should say something like "Flip horinzontally" or something like that.

After that it will look like this.

Press Enter to accept the transformation

and now merge both layers into one.

Now let's duplicate this layer again

Ctrl+T to transform it again

But this time instead of horizontally we will flip it vertically

And it will look like this ~~

And merge them together again.

I know it doesn't like a doilie right now (more like a centipede got hit by a car xD)

but shhh be patient, dears! xD

We're going to duplicate the layer again

but instead of flipping it with the options we used before

we'll press SHIFT on our keyboards

the one that's above CONTROL, at the bottom left of your keyboard.

hold that key and rotate the layer

like this.

You have to do it holding the SHIFT key so that way you'll exactly rotate it 45º everytime.

it's important to do it that way otherwise the trick won't work.

And now merge the layers again.

(I'll move this to the center...)

What's next? Duplicate the layer once again

Ctrl+T again to rotate it

Ta-da ~~

Our own doily ♥

Easy-peasy.

Now you can decide to either leave it like this (remember to merge the layers once again).

Or if you want you can duplicate it one more time

but this time rotate it manually as you prefer (don't press Shift).

So it will look as you want.

Like here in this sample, we can have 2 different kind of shapes.

This one is more roundy ~

Doilies can be used in many ways. You can use them to be the background behind a character.

It works very well with chibis, let me show you.

(first I gotta merge everything)

And we'll be using this chibi for a test.

Let's pretend that you think the actual white background is very boring

Then let's pick our doily, ctrl+C, Ctrl+V to copy-paste it

And now resize it to your preference.

That's why you need the doily to be big enough to fit your picture

If it's too small it will get pixelated and ugly when you resize it

We now move it to the back, and let's change its color

See?

The chibi now looks more funny and more alive than before

You can also use doilies to make some kind of small patterns

like this

and then repeat the shape

until the patterns fills the background.

Just like this ~~

See? There's a lot of ways to use them ^w^

Why don't we try making more to see how different can they get?

As you see they're super easy to make!

If you don't have doilies now it's because you don't want them xD

I hope you've enjoyed this tutorial

Don't forget to give it a Like and subscribe so you don't miss any new videos.

You can also support me on PATREON and get access to my art, sketches

projects and tutorials before anyone else ~

That's it for today.

See you on the next one guys, bye bye ♥

For more infomation >> How to make doilies/lace/cute decorations - Duration: 7:58.

-------------------------------------------

HOW TO MAKE AMERICAN BISCUITS - Duration: 4:23.

Hi and welcome to Steve' Kitchen. The English language is a strange thing

whether you say tomato

or tomato it really doesn't matter they mean the same thing

unlike the biscuit. Now when I was in Louisiana I think it was

in the USA, the wonderful USA I

first came across the American biscuit now here in Australia

and in the UK for that instance go and get a biscuit you know it's going to be

covered in chocolate

it might have raisins in it we call biscuits what the Americans call

cookies so I was a little disappointed when I went to get biscuits

something to dip into my coffee and I end up with something that looked a

little bit like a scone

it was a savory scone actually, that's the American

biscuit now I was disappointed but I've learned to absolutely love them

and today I'm going to share with you one of my favorites it's a cream biscuit

come on let me show you how

Now this is a very simple recipe. I've got two cups

of self raising flour. Now a lot of people don't have self raising flour you

can use all purpose and add

a little bit of baking powder and salt into it.

I'll leave a little explanation down in the description. I'm going to add a tablespoon of

sugar in there as well

and then we're just going to pour in some double cream a cup and a half

of nice thick double cream and I think in some places they would call this

a heavy cream and then I'm just going to take a fork

and start to pull these together then I'm just going to start using my hands

and one of the important things with a biscuit is not to overwork

the pastry you want that lovely crumbly texture. So just pull this together until

you've got a nice firm dough

then when it's drawn together like that we just pop it out

onto our work counter dust the surface with a little bit a flour

and as I say we don't want to overwork this dough but I'm just going to square

it up now

and then sprinkle a little bit of flour again

over the top of our dough and take a rolling pin

and we just going to roll this out until it's about

half an inch thick then when your happy you've got the thickness you want I've got a

3-inch

cutter here and I'm just going to use it to cut out

my biscuits and that's what we're looking for

and whilst we lay out our biscuits on a non-stick tray or cookie sheet we'll just

preheat your oven to 420'F that's 220

degrees Celsius

it's a pretty hot oven leave a little space about around each one

and the last thing we want to do before these go in the oven I want to take a

little bit of melted butter

and just brush it over the top and now we're just going to pop these in the oven

for about 10 minutes until they're lovely golden brown

Now there they are out of the oven and they're beautiful golden brown

What I am going to do before they actually cool down is I'm just going to

brush

again a little bit of melted butter now I'm using salted butter

it's up to you whether you use salted or unsalted and then I'm going to lift these

biscuits onto a cooling rack and just let them completely cool down

now you look at those they look absolutely delicious now

I like to have these with a little something sweet so I'm just going to

take one of these and look at the way

that pulls apart its absolutely beautiful

and that's because we haven't overwork the dough lovely and crumbly

now I'm just going to pop a little bit of raspberry jam

on top of that now the English in me wants to add a big dollop of fresh cream

as well but I'm going to have it just

as it is. So there you have it American-style biscuits albeit

a cream biscuit. I'm going to try this because it's smells delicious

mmmm

and it tastes delicious. Now what a delightful and light and fluffy biscuit that is

it's fantastic. Now I'm going to be using this for another recipe so keep them Peeled

because that's coming up very soon

as always I'd love to hear your comments down below, please share the love, give this the

thumbs up

I'll see you in the next video be good.

For more infomation >> HOW TO MAKE AMERICAN BISCUITS - Duration: 4:23.

-------------------------------------------

DIY How to make diaper stroller (ENG Subtitles) - Speed up #362 - Duration: 5:00.

Hi. Today I will show you how to make stroller made from diapers.

I made it by request from my viewer.

Detailed list of all needed items is in the description of this video.

First roll up a diaper.

Secure it by using rubber band.

Do the same with about 40 diapers.

Now the wheels.

Unfold a diaper. Fold it in a half. Roll it up.

Secure it by using rubber band. Do the same with 4 diapers.

Draw a big oval shape on cardboard and cut it off.

Next, place a few diapers on the cardboard.

Secure them by using rubber band.

Add more diapers. Cover entire cardboard.

Secure them by using second rubber band.

Now, wrap everything by using organza.

Secure it by using glue. But don't glue it to the diapers.

Place 4 diapers on the top.

Attach them by using rubber band.

Add 3 diapers.

Unfold a diaper and place it on the top.

Bind everything together by using rubber bands.

Place a piece of organza on the top.

Glue it to the sides (to the cardboard).

Fold an excess of organza on the back.

Glue it to underside of the stroller.

Glue 2 strips of ribbon (50mm) around the stroller.

Glue 2 strips of ribbon around the top part of stroller.

Glue the strips of ribbon (different color) on the middle of previous strips.

Glue 2 flowers together.

Glue a bead on the center.

Glue the flowers to the stroller.

Cut a strip from cardboard.

Wrap it by using ribbon.

Glue it to the stroller.

Wrap a wheel by using ribbon. Secure it by using glue.

Glue the wheels to the stroller.

Decorate a rattle by using ribbon.

Place it in the stroller.

Finally make a bow from ribbon.

Glue it on the back of stroller.

And it's done.

Diaper stroller is a great gift for newborn baby.

It will also be a nice addition to a baptism gift.

I used a rattle. But you can use teether, plush toy or baby bottle instead.

Please give a like to this video and subscribe to my channel.

Thanks for watching. Bye bye.

For more infomation >> DIY How to make diaper stroller (ENG Subtitles) - Speed up #362 - Duration: 5:00.

-------------------------------------------

Make Your Own Hoverboard From Back To The Future! (DIY) - Duration: 12:48.

[Theme Music]

Hey guys and welcome back I'm Dave AKA The Costume Kid and today we're going

to be making a Hoverboard from Back to the Future 2. So if you don't know

Back to the Future is my favorite movie and I've made both be Back to the Future

Part one and Part two costumes in the past and I thought today we should make a

Hoverboard. So while doing research on how to build

this I saw an awesome video by Dustin McLean for DIY Prop Shop where he made a

Hoverboard I wood and then to get that iconic look of it he not only spray-painted

it pink but he put some templates that he made on the Hoverboard on it

so it looks really really cool and he put a link in the description so I

printed those out and that's what we're using today. So I already have these

printed out and ready to go there are on some photo paper there looking pretty

nice and I'm pretty happy with this. So I scaled this to 90% because you can do

his actual size which is fine and it's a decent size Hoverboard but I'm a kid so

I'm a little bit smaller so I just made it 90%. Now he made his out of wood of

course and he said in the video if you don't have the tool to use wood you can just

use styrofoam that he bought which would be cheaper but I feel cutting of styrofoam

wouldn't really work and it just feel too fragile and stuff so I'm going to

make it out of of course my favorite EVA foam. So I feel I'm just going to cut and

layer this stuff together so I can use multiple sheets wide and then probably

this is a little thin for a hoverboard I'm going to stack it up so we have

double thickness and should be a pretty good hoverboard so I've got a couple

pieces here if I can stick them together that's what actually usually I don't

like the puzzle peices but in this case it's good it'll help us this together

and we're going to glue it to and we can take our nice pages and by

the way there are marks unlike Front A, Front B, Front C, and going on but you

got to put those on the back too because after you cut them off they're not there

anymore so now we can put it like this and actually see how much foam we need

because remember we're using double

alright so now that I've got this basic shape for the hover board I'm going to

set it on top of the same piece of foam that I can make it double a high and

also we won't have to stay in the texture side off because both sides are

going to be smooth alright now that I've got both of these cut out I can glue

together and actually what I'm going to do this I also make sure you flip sides

so that these seams don't line up and there's no weak points. But when I glue them

together I'm going to sandwich a piece of cardboard in there so that when

they're glued together they can't do this as much it'll still be pretty soft

but a little bit stiffer. So I'm just gonna coat each side of this

and then let it dry a couple minutes and get tacky and then we can stick the two together.

[Music]

All right so this thing is looking pretty awesome it's fairly stiff now

which is good for a skateboard it's the right size I want to be so uh I'm

pretty happy with this thing unfortunately like any build you can

expect that I made a mistake this time you remember earlier in the video where

I said you're supposed to stick both of the attachment sides together that on

the top and bottom the outside will be smooth well I kind of forget about that

and this bottom is the rough side so you can either sand this but unless you have

an electric sander that's going to take you ten million years instead I'm going

to cover it with just some adhesive thin craft foam so it will end up being a little bit

thicker but whatever.

[Music]

Okay now that both sides are perfectly smooth foam we can get to doing the

curve in the front and the lip in the back.

[More Music]

Ofh! That is a really rough cut so I'm

going to refine that with some sandpaper in the rotary tool. All right so now a

lip on the back what I'm going to do is put the papers on here and then

luckily Dustin marks where the folds will go so I'm going to cut that there

and then I can cut another part at an angle and then it will stick up a little

bit like the real one does. All right so now I know that I'm going to cut it

right there I'm just going to cut that and then over here somewhere because I

have a bit of extra room I can cut it at an angle and as Dustin said I think it's

about 20 degrees. Okay so this is what I cut it at as you can see and now we

can use more contact cement stick it on there and it'll stick up like that and

of course I guess made its angle but I think it's pretty good all right last

step before painting is all these edges here I'm just going to sand them down

making a little smoother and then also using the rotary tool bevel the edges so

they're a little bit more round

[Even More Music]

All right this thing is all sanded looking really awesome and now it is

time to paint it so of course I'm a first hit with a coat of Plasti Dip and

then a coat of some pink spray paint

[Yes, I like Music]

okay so we are back this thing is nice and painted it's looking really really

awesome I didn't get the full middle of it but that's because the paper is going

to cover it so that's actually what we're going to do now lay down the

sheets of paper. Alright so the papers are set out here they look really really

awesome and now to how we're going to attach that you could use whatever glue

you want to hot glue, super glue, Elmer's glue but hot-glue make it wrinkle, Elmer's glue

could make it wrinkle and super glue I just don't have any but I think our best

option here is using some spray adhesive when you spray it and then it comes to

and you can stick it down so I've got some here some spray adhesive I don't

know when this is from so I don't know if this stuff's going to work or going

to test it out and it doesn't work we just use contact cement. All right I

thought it was fitting that we use our logo scrap from earlier so just going

to flip this over you got our spray adhesive stuff here I don't remember

we're using this so let's test it out okay little foamy I guess so start picking

it up and we use our foam scrap again. Hard to do this with one hand and hold a

camera but stick boom press it down there

Alright this stuff works pretty good stick it on great so I'm all set to use

this for the rest of the build it is flammable so I'm doing it once again in

my garage but uh let's do this.

[Did I Mention I Like Music]

Alright so the board is back inside now and we are ready to finish this up with

a few more details that we're going to do mostly out of foam. But for the

magnets on the bottom of the hoverboard I'm going to be using some paper bowls you can

also you some plates. About to start this build, realizing I don't have any plates so uh

I'm heading up to the store now. I'm debating whether to do plastic plates or

paper plates. Plastic things might look a little shinier but I feel like that the

spray paint will actually flake off of it if I do paper plates I think it will

bond a little better and just stick to it more cause it's like cardboard yeah.

Got me some paper plates. And Cinnamon Toast Crunch it's the best. Basically I'm

going to cut the rims off of these make some new rings out of foam for them and

then paint them black with silver on the top.

Okay so while the magnets are drying we're going to work on some of these

other foam details I'm just going to do those bit more 2-millimeter craft foam

is my adhesive and Dustin actually made these other plans to

another shapes so first off two of each of these on to red foam. And the purple

piece I just made out of some EVA foam that I cut the shape and then the

circular parts I sanded down with the rotary tool.

[Do I Even Need To Say?]

[THERE'S MUSIC PLAYING RIGHT NOW]

All right so the final detail on the top is the footplate that he steps on

so I'm going to do that with probably some more EVA foam painted green then

there's a stripe on the top and just a flap so he can attach it I've got just a

few details here to finish up but mostly yea, this thing's done.

[Showcase Music]

[End-Clip Music]

For more infomation >> Make Your Own Hoverboard From Back To The Future! (DIY) - Duration: 12:48.

-------------------------------------------

how to make red velvet cupcakes from scratch - Duration: 0:27.

put in half a teaspoon of salt.

half a teaspoon of baking soda

and one and a half teaspoons of white vinegar.

and, we mix

For more infomation >> how to make red velvet cupcakes from scratch - Duration: 0:27.

-------------------------------------------

how to make red velvet cupcakes from scratch - Duration: 0:22.

we just added two and a half tablespoons of cocoa powder, half a teaspoon of vanilla extract, and two tablespoons of red food coloring ( optional )

beat that into the batter.

For more infomation >> how to make red velvet cupcakes from scratch - Duration: 0:22.

-------------------------------------------

Venezuela's answer to Katie Price will make your eyes pop - Duration: 2:00.

Venezuela's answer to Katie Price will make your eyes pop

Because glamour model Francesca Larrain is definitely worthy of your attention. The beauty hails from Venezuela but now splits her time between Italy and Miami.

And while shes no stranger to lads mags and swimwear campaigns, shes recently taken her career in a more global direction by conquering the internet.

On top of her workout tips and behind-the-scenes glimpses of her shoots, the 21-year-old has mastered titillating her social media following with red hot selfies.

In fact, she has racked up a whopping 123,000 Instagram followers over the last six months. Between the endless pins, full chest and peachy rump, its safe to say Francesca scores a clean sweep in the sex appeal stakes.

Although shes naturally a brunette, her curly blonde tresses have become something of a trademark, along with her impossibly full lips.

Recent highlights from the vixens account include a topless snap in which she draped herself over a balcony for mind-boggling levels of sideboob.

Another headless shot saw her don a bikini that looked to be several sizes too small, leaving her surgically-enhanced chest dominating the frame.

In a third pic, she flaunted some extremely intimate tan lines in what might be the worlds most high-cut one-piece.

In short, Francesca has got the whole sex sells thing down to a fine art and looks to be enjoying a seriously luxe lifestyle as a result.

We havent seen assets like these since Katie Price stripped down to her bikini bottoms in Miami.

For more infomation >> Venezuela's answer to Katie Price will make your eyes pop - Duration: 2:00.

-------------------------------------------

How to make an avatar - the easy way - Turn on captions - Duration: 6:59.

So basically all you need to know is

Create a clipping mask over the desired white shape

Don't do it over the stroke put the image in between the 2 layers

Play around with gradients and colors to your choosing

add a font that fits the photo

and make that font look nice too

now you want to press ctrl+shift+alt+s to save to web

resize to 128x128

and save: watch video for visual representation

For more infomation >> How to make an avatar - the easy way - Turn on captions - Duration: 6:59.

-------------------------------------------

How to Make Faster our pc...Tech_vivek - Duration: 1:24.

first go to windows

type "run" in search bar (win+R)

press enter

now type "msconfig" and hit enter

click on "load startup item"

now click on "startup"

now click on "disable all"

now click on "ok"

now right click on start menu nd click on "task manager"

click on "startup" and disable high "startup impact" files.

press "ok" and restart your pc