if you want the remote, plug the antenna
switch to "ON", press the other switch, then the machine will work
car remote,
relay
IC 7806, IC 7809
diode 4002
note the cables leading to the electric motor
join relay like this
pairs of diodes, and watch bracelets
select one of the wires of electric motors, and connect diode
looking for input kebel tagangan
because this circuit works on 6V flow then need IC7806
The cable must be connected to a voltage (+) 12v
connecting cables to the input and "NO" relay
The button "on / off", and these doble button starter
replace the antenna with copper wire
This is koponen to change frequency, Swivel stay inside, but should also be adjusted remotely.
try a series of shielded from water
This is a 12v voltage input cable
The cable connecting the starter switch doble (parallel)
The cable connecting the ignition key (parallel)
if the ignition using four wires, then took the relay 8 pin
cable (+) battery,
The cable from the CDI I dropped out,
This cable (+) ignition,
if the relay is "on" then the motor is also ready
if still confused, please see "How to make a remote key of emergency lights"
pin14 cables connect the groud
pin13 cables connect one RC cable yellow
cable (+) RC connect the output IC7809
RC other yellow cable connect (+) battery

For more infomation >> Shell Rimula - Sizin kadar dayanıklı motor yağı - Duration: 1:02.
For more infomation >> Perfect Placement -- Motor Trade Jobs - Duration: 2:00. 
Không có nhận xét nào:
Đăng nhận xét