Good morning guys. It's Hannah.
I'm just looking at my coffee and the lipstick stain on it.
Kind of went overboard this morning.
So an interesting fact about me is that I actually gave my high school graduation speech.
And I'm 17 or 18 years old, talking to my fellow peers
about these ideas that we've been taught give us meaning in life.
You know, getting a college degree, knowing what we want to do in life,
finding the perfect person to be with, having kids, following this straight line.
And two years after I gave that speech, I went to a mental hospital.
I was involuntarily placed and got a diagnosis of bipolar two disorder.
Bipolar completely impacted my life.
But it took me years to realize that those ideas that I was saying gave us meaning,
that we believe gave us meaning, they don't.
They're accomplishments. They're blessings - if you have the proper resources even.
If you're lucky.
Challenge is what gives you meaning.
And, for me, definitely that's what bipolar has done.
Bipolar means that I'm different;
that I have a mind that doesn't fit the standard guidelines of what's acceptable in society.
Bipolar disorder does not mean I'm a bad person.
In fact, it's the opposite. I have extreme empathy.
And I think I'm a colorful person and a kind person.
But man, I face a lot of stigma and that sucks.
It influenced my path. It influences my path, my work, my passion.
And it's also my biggest struggle and my biggest challenge that I face on a daily basis.
But I believe we fight against it.
I feel like - I've felt like this for so long - after I got diagnosed ...
Now we want to say out loud, right? "I'm okay! I'm okay with this.
I can embrace this disorder. I can take control of my own life. I can rock this."
We feel that inside. We want to say that
but it goes against everything that we've been taught about mental health conditions.
Those are the words that do not define or give meaning to bipolar disorder.
And it was not until I was able to define it on my own terms
and figure out what it meant to me
that I could finally let the light in and see the positive side of it.
And I hope for everybody watching, or anybody that's not watching even,
that that's what I can help you do as well.
To give you that strength to kind of go against what's ingrained in us.
That it's bad, bad. Because it's not. It's not.
And I want to hear your ideas about this.
What does bipolar disorder mean to you?
Please leave your comments your thoughts below or do a response video.
I would love to see those. I'll leave the information on where to send it below.
And, of course, I can't wait to see you next week.
Have a great morning. Bye.
For more infomation >> What Bipolar Disorder Means To Me - Duration: 3:31.-------------------------------------------
What is LinkedIn? How To Create A LinkedIn Account? 2017-18 - Duration: 5:34.
Hello! Friends
In This Video I'm Going to tech you
What is LinkedIn? How To Create A LinkedIn Account? 2017-18
LinkedIn Tutorial for Beginners - LinkedIn Profile Tips
Get A Job @ LinkedIn
If You Are a Student
LinkedIn for Students: Your Career Starts Here
LinkedIn Also have
LinkedIn Connect to Opportunity™
You can also find Your friends on LinkedIn
Like Facebook,Twitter
You can also share photos,video on LinkedIn
Now open Your web browser
search on goole
LinkedIn.com
As you Can See Here a new window
Just put here Your details
Not Mine
Ok
If you have any confusion about how to make linkedin profile better,What is LinkedIn? How To Create A LinkedIn Account? 2017-18 please let me know through comment.
I hope You Learn From This Video Tutorial,What is LinkedIn? How To Create A LinkedIn Account
If You Like This Video Then Share With Your Friends
👍 LIKE ➡ SHARE ➡ SUBSCRIBE
Please Subscribe Our YouTube Channel and You will get Video notification Next time
Again Thanks For Watching and See You Soon.
About: Technical Hoque is a YouTube Channel,Where You Will Find Mobile/Computer Tips and Tricks,New Technological Videos in Hindi.
-------------------------------------------
What does sex mean to you? - Duration: 2:01.
Sex
and an emotion
not with my friends
Me?
Oh no
Okay so I mean like everything else in life.
There's a dark side to it, there's a good side to it.
Fun and an emotion, both.
I don't know...
I can't say it like you know
It's a way to reproduce
and create babies
Really?
No I don't know
Sex is a natural biological thing
and because of course here we don't
get enough information on it,
I don't know what that thing should be.
For me, no. It isn't
It's a very natural thing to happen
For me, no
Very natural
Yes
Yaa
With my like elders and stuff, yea
It's not a taboo word
but the people have actually made it one.
Yes there are certain conditionings.
So sex is not a taboo word
but it has become a taboo word.
Unfortunately, it has become a taboo word
because children have inaccurate information.
Parents, sadly,
have not been able to speak to their children
openly and honestly.
And there is no judgement here on
parents who have not been able to talk to their children.
The point is that
that parents have to be more candid
and these conversations around sex
have to be ongoing with the children
depending on the age of the child.
-------------------------------------------
Do goals count as points in Emirates Cup, and what TV channel is Arsenal's yearly tournament on? - Duration: 2:52.
Do goals count as points in Emirates Cup, and what TV channel is Arsenal's yearly tournament on?
AFTER a year hiatus, the Emirates Cup is back this weekend. And unlike other pre-season friendly tournaments, goals=points.
The Gunners will hope they can hang onto star man Alexis Sanchez despite rumours of a move to PSG. Do goals count as points in the Emirates Cup?.
The short answer is yes. According to the Arsenal website, the competition rewards attacking play, with teams being awarded one point for each goal they score.
A statement on the Gunners website reads: "Teams will be awarded three points for a win and one point for a draw. The competition also rewards attacking play, with teams being awarded one point for each goal they score.
"In addition, shots on target will be taken into account and will be used to decide the tournament winners if teams are level on points and goal difference, with the winning team being presented with the Emirates Cup trophy after the second match on Sunday, July 30.
Arsenals infamous mascot, Gunnersaurus. What are the Emirates Cup fixtures?. Saturday July 29th – RB Leipzig vs Sevilla FC (2pm), Arsenal vs SL Benfica (4. 20pm). Sunday July 30th – RB Leipzig vs SL Benfica (2pm), Arsenal vs Sevilla FC (4. 20pm).
RB Leipzigs danger man Timo Werner starring for Germany in the Confederations Cup. What TV channel is it on?.
The Emirates cup will be played on free-to-air channel Quest, available on Freeview channel 37, Sky 144 and Virgin Media 172. New Arsenal man Alexandre Lacazette shows his scoring prowess in training.
-------------------------------------------
What Beer Do You Drink Down Under? | Learn Australian English | Aussie Culture - Duration: 3:38.
What kinds of beer are common in Melbourne and common in Australia that I should try?
The common ones, Ryan, unfortunately, don't always tend to be the best ones.
So, to talk to you guys a little bit about beer,
and the beer that I would drink here in Melbourne.
Melbourne is really good because we're so multicultural.
You'll go anywhere here and you'll find be from everywhere.
So we have Japanese beer like Asashi.
We'll have stuff from, I think, Holland, like Hoegaarden.
We'll have German beers.
We'll have stuff from Britain.
It just... you get it from everywhere.
Those beers tend to be the good ones.
The common Australian beers, at least that found in pubs and on tap,
you're going to find things in Victoria like VB, which is Victorian Bitters.
That's your bog standard boring Australian beer.
VB.
And the equivalent for places like Queensland is XXXX.
So, it's for these, XXXX, and it's yellow.
Those are really really light easy to drink boring beers.
You'll also find things like Carlton Draught.
Carlton Draught is another one to ask for around Melbourne.
So, that's another good one.
But yeah, there are heaps of things.
Another one is Boag's.
I'm trying to think off the top of my head.
Fosters is around the place, but not really.
It's one of those things.
You'll see when you come here that a lot of the time what's on tap,
you'll have those, Carlton Draught, VB.
And then, you'll have things like Guinness, Asashi, stuff from Europe,
stuff from all over the place.
So it's it's pretty good in Melbourne.
I should probably mention guys that that question kind of caught me off guard.
I wasn't prepared for it.
So, I couldn't think of a lot of the beers that I wanted to mention.
So, I thought I would add this on afterwards and mention a few other really good
Australian beers that are worth keeping an eye out for when you come to
Australia or if you're here and you already go out to pubs and clubs, and enjoy beers.
So some other brands include Hanh, Tooheys.
We've also got Mountain Goat.
That's a nice one that I often have when I go out.
Little Creatures has a whole range of different beers that you can get,
and they tend to be brilliant.
Beyond that, I would definitely recommend trying James Squires.
There's a whole series of different kinds of beers from James Squires.
That's another brand.
And then other ones that you're going to see here
that aren't Australian include things like Corona, which is I think Mexican.
We've got Stella Artois.
We've got Becks.
You'll find things like Heineken all over the place everywhere in Australia.
And I... the list would go on and on and on.
But yeah, I definitely recommend keeping an eye out for all those beers guys give them
a try.
See which ones you like.
And let me know in a comment below if you already have tried some of them.
Anyway, that's enough for me guys.
Peace out.
See you later.
Hey guys!
Thanks for watching the video.
Remember if you want to support the channel financially
you can do so via my Patreon page,
which is linked in the description below.
If you can't afford to support the channel financially
you can still help by spreading the word and sharing the videos.
Thanks so much guys.
Stay awesome.
All the best.
-------------------------------------------
✨What's the the BOX challenge - Duration: 7:06.
we just notice that it was not showing
-------------------------------------------
BACKGROUND RADIATION || What is it? Where does it come from? - Duration: 2:58.
What is background radiation?
So, we live here on planet earth, I assume you're watching from planet earth
I hope you are...
..actually do I?
Anyway...
on earth there are various types of radiation which we are exposed to
all the time some of that radiation comes from the sun as cosmic rays
some of that comes from the food we eat - some of it comes from rocks which might be nearby
some of it might come from medical equipment - if you were going to have an x-ray
some of it might come if you walk over Hiroshima or Chernobyl
or somewhere which has experienced some sort of nuclear disaster like Fukushima
but most of it comes from radon gas - 50% of all the background radiation comes from
radon gas
which has the symbol Rn and it's just this colourless, odourless
radioactive gas which is present in the air all around us
it depends on what kind of rocks are nearby
as to its concentration and how prolific it is
but in general, most of the background radiation is accounted for from this radon gas
there are little spots within different countries with slightly greater concentrations
depending on what the rock type around it is certain rocks give off
more radiation than others
background radiation isn't really a problem for us in general
unless you're in exceptional circumstances
if you're an airline pilot you are exposed to a few more cosmic rays than
us down on the earth at sea level because most of the
dangerous cosmic rays are absorbed by the earth's atmosphere
so not many of them actually make it through the atmosphere
through the ozone to actually affect us although some do, about 10-15% roughly
most of it (background radiation) comes from radon gas
we get some from food, we get some from...
... rocks we get some from medical imaging
only a tiny tiny fraction - I mentioned at the beginning
nuclear power stations and fallout etc etc
but actually only a tiny fraction of background radiation does come from those sources
around 1% so it's really a minuscule amount in the grand scheme of things
so that's background radiation for you
you can learn more about half life here or the types of radiation here
so you can check those out
this is physics friend - you can subscribe there
and, if you have any comments or questions then please do just write them in the box
and i'll just type back to you and answer them so...
thanks for watching and i'll see you again next time
bye bye
-------------------------------------------
What does YLC mean to you? - Duration: 1:14.
What does YLC mean to me?
Being open.
YLC is very inspiring.
This is where I realized my identity.
YLC is amazing!
YLC is a place for leadership and experience!
YLC is powerful.
YLC is a place to grow.
This is where I can learn my mistakes and realize my errors about my leadership style and
recognize areas of improvement to be a better person -- that's what YLC means to me.
YLC helped me gain self-confidence.
YLC has helped me improve my skills for the future!
I've been learning how to run a camp and appreciate the important workshops topics so far.
I'm interested in everything that YLC does so I can bring that to my home country, Indonesia.
We want to develop a camp program there that is similar to YLC.
I feel inspired to be here.
I've made some new friends and it's been a good experience so far.
YLC will always be in my heart.
Honestly, YLC is all about teamwork and time management!
YLC is the future.
-------------------------------------------
Mooji - Co je Probuzení - Rozhovor se Šrí Moojim (What Is Awakening) - Duration: 58:11.
For more infomation >> Mooji - Co je Probuzení - Rozhovor se Šrí Moojim (What Is Awakening) - Duration: 58:11. -------------------------------------------
What can the Valley expect from the Great American Eclipse? - Duration: 1:36.
For more infomation >> What can the Valley expect from the Great American Eclipse? - Duration: 1:36. -------------------------------------------
Man Utd's pre-season centre-back pairings suggest Mourinho is not thinking what everyone else is - Duration: 4:10.
Man Utd's pre-season centre-back pairings suggest Mourinho is not thinking what everyone else is
Manchester United's preferred initial centre-back pairing for the 2017/18 season may surprise many supporters judging by Jose Mourinho's pre-season team selections. The obvious duo to marshal the backline is Eric Bailly and Victor Lindelof.
Bailly took no time to settle at Old Trafford following his £30million arrival last summer. The Ivorian immediately established himself as the first-choice option.
In the Premier League he was selected 20 times in central defence, more than any other player. Phil Jones was picked 18 times, Marcos Rojo 17, Chris Smalling 13, Daley Blind 8 and Matteo Darmian once.
What is clear from those figures is Mourinho struggled to commit to a regular pairing – signalling he was unconvinced by his options in his first term as Manchester United manager.
So when he went out and signed Lindelof from Benfica for £31m it came as little surprise. For that money, and with Mourinho's apparent doubts over his existing options, it had been assumed the Sweden international would become Bailly's regular partner.
But Mourinho's pre-season team selections suggest the Portuguese tactician has other ideas. The duo were paired together in the second half of Manchester United's first game of the summer, against LA Galaxy. But since then, Mourinho hasn't tested them together again.
In the following match Smalling was given an opportunity alongside Bailly – which also hasn't been tried since. In the last four games – including today's match with Valerenga – it has been Phil Jones alongside Bailly.
Mourinho has just one more opportunity to try the pairing most expected to see before the Premier League season begins. That will come against Sampdoria on Wednesday.
They also play Real Madrid in the Super Cup before the first match of the new campaign but Bailly is suspended from that game.
It would suggest that Jones – who has impressed during Manchester United's pre-season – will be the first choice centre-back ahead of Lindelof.
It would be an impressive achievement for Jones who has struggled badly with injuries in recent years. In three of the last five seasons he's failed to feature in more than half of Manchester United's league games.
However it will be a worrying indictment on Lindelof. While early days, his appearances in pre-season have caused concern.
When Mourinho was questioned why he hadn't been starting Bailly and Lindelof together following the defeat to Barcelona he offered a confusing response. 'I think we will understand the reason in a couple of days.
Bailly is suspended for the first two matches [in the Super Cup and Champions League], as you know, and I think in the next couple of days we will have the understanding of why I play Lindelof and Smalling.
It's possible Mourinho is simply keeping his cards close to his chest – but if so it will have been a major risk to have given Bailly and Lindelof just 45 minutes practice together.
We will have a better idea when Mourinho names his team for Manchester Uniteds Premier League opener against West Ham on August 13.
-------------------------------------------
What Defines Success - Duration: 2:52.
For more infomation >> What Defines Success - Duration: 2:52. -------------------------------------------
What Can I Eat If I Have Diabetes - Can Diabetes Patient Eat Strawberries and Blueberries? - Duration: 5:01.
For more infomation >> What Can I Eat If I Have Diabetes - Can Diabetes Patient Eat Strawberries and Blueberries? - Duration: 5:01. -------------------------------------------
ReachOut Parents: Is your teenager unsure of what to do next? - Duration: 2:39.
For more infomation >> ReachOut Parents: Is your teenager unsure of what to do next? - Duration: 2:39. -------------------------------------------
Kid Gets Trolled On Discord... see what happened - Duration: 3:36.
For more infomation >> Kid Gets Trolled On Discord... see what happened - Duration: 3:36. -------------------------------------------
Idk what I'm doing - Duration: 0:45.
I'm down here ok :D, so lets do it.
Let me take my glasses off, ok
I'm really claustrophobic, so this isn't gonna go well :(
Hi :/
I cant do i- o cody..
This sweatshirt is too big, like the hoodie (awesome grammar).
wha chu duing wit my glassses boi
Hi :D
*Pupper Attacks*
O Jesus Christ- Oh god
10 out of 10 would do again :D
-------------------------------------------
Delta kossel Pulley Recensione - Review sub EN - What others do not tell you - Duration: 23:02.
Hi guys, today a review on my new delta printer
it is a Kossel mini ... pulley version
that It was kindly donated by gearbest
and .. they also gave me the alluminium hotbed
and a ABS spool by sunlu
because I not have 1.75 filaments ... all my filaments are by 3mm
and kindly gave me a spool
in the kit there is already a spool of plastic
in this box that I use to protect filament from humidity
temporarily
there is a PLA filament
that you find into the kit ... one kg
with the default filament holder
let's start with the review ..
let's look at the main features
an analysis of printed pieces
and to the end .. the considerations
good viewing
For unboxing nothing to say
many pieces ... good packaging
the list of pieces you can found on gearbest
and nothing .. we continue with more interesting things
the extruder into kit
is a clone of E3D v6 lite
practice .. is the version
with the inner ptfe tube .. which goes directly to the nozzle
here the electronics
with 5 drivers
for the printer you use only 4
the fifth is for future expansion
it is good that it is already present
it can also serve as backup
here we have the cooling heat sink for attack on drivers
the electronics seem have good finished
the firmware that you see here .. is the 1.1.0 version by Marlin
you can found it on Anycubic google drive
the link, you can found on page of this printer on Gearbest
with printer you receive a sdcard
with some software and the old firmware
I suggest you to install new version
because the old version has defects in the display
sometimes it block ... makes strange characters on the coordinates
work good for printing objects
but have this display error and it is slow when report the data
exemple ... the layer change is report after half of layer already start
well ... let's look at the prints
here I have my test pieces for calibration
I made this for delta
you find the link in description
the others pieces, you can found on thingiverse
this is the calibration cube that find into sdcard
very smooth to the touch
2 others calibration cube
printed with Z on bed
speed 50mm/s
there is a little ghost effect
is more visual than tactile
empty stamps
not infill
this line is 2mm deep
it print 2mm over the air
this is the reason why you are a bit deformed
here I print .... a Groot
reduced at 70%
the print seem very good
really smooth
here Einstain
and here ..
this is a problem ... a little of supports
printed without supports
and .. a little .. because the cooling fan not much efficient
here .. the plastic have an edge and it curves upwards
after some round
go out
for people that already print ... is a known problem
if cooling of plastic was more efficient ... the problem disappear
note ... the details
I do not know if I can show you
there is the symbol of the pi
here ... and here
is visible
good for me
here .. Alien head
use the supports
also this ... has reduced at 60%
I do not know if I can show you
I use the reflection to show you the details
very good ... and I like this design
after ... here
the horns
it is ... a good print
really smooth
here another ... Groot
baby Groot
and here ... we have same problem than Einstain
that ..
cooling not much efficient
for speed print
and here .. I intervened
and slow down by 40% the speed
them
stop the problem and return to print good
this .. is my keyrings
only to see ... if print good the islands
yes .. good
them .. this
my cup dispenser
I think I have not uploaded it yet on thingiverse
I will do it
and here ... same problem of cooling piece
here, is where the fan blowing
work good
when print in opposite side .. the problem show up
also in this case
the piece is smooth
and now see this .. compared with same piece print with my 3Drag
this is my support for tablet .. for wall
start from here
them
here
see
there is same ghost effect
but here there is an edge
every change on height
there is an edge ... no smooth
here it is flat
as the angles ... are print fine
however in any case
there is the ghost
which seems to be identical .. to this ... 1, 2, 3
it almost makes me think ... of an Cura problem
of slicing
this is made with my default printer
is ... more rougher
this is smooth
also holes ... here have edge
here are flat
here some imperfection
due to Z layer change
that in my 3drag is slow
instead in this kossel not seem to show
here the same
not edge ... here yes
a small note on speeds of print
I really surprise of the speed
much height of a cartesian printer
from the first comparisons with time
that show me Cura and the time of real print
I can say
is faster than 60-65%
this means that the print time
which is 1/3 less than what Cura shows you
then ... do not overdo it with print speeds
how did I do that I started with 50mm/s
I had the head that went very very fast
with 30mm/s of speed
emm ... a speed at 30 is comparable to 50-55 of cartesian printer
I print good at 40 and 50
I have not tried higher speeds because the head moving very quickly already at 50
now some pictures from some print that show this
we came to the end
what to say ..
we have to consider that this printer is offered at about $190
If you are interested, there is a coupon in the video description
to get a small discount of around $10
The printer works good
print good finished objects
in general
I have nothing to point out, except for a small problem
are the printing measures
which have a small mistake
in my specific case
the error is around 0.75% on Y axes
and .. 1.35 .. 1.36% on X axis
probably is caused by one of these rods
that it is not equal to others rods
now
considering the price of the kit
the error ... is also .. small
you have to consider the use you think of doing of the printer
if for you this little error
is unimportant
because the pieces you do
do not need this precision
then ... it is a good printer
instead of a cartesian
it print much quickly
did not give me any problems
why not!
if you print objects ... that need precision ..
I suggest you think of a cartesian version
on gearbest
there are various cartesian version
Anycubic itself does different versions of cartesian
around same price of this
you have to evaluate your choice
my vote for this printer is
7.5
out of 10
only for this problem on print measures
that because for my use is much important
after this test
I very like delta
I think I'll make some changes
and try to correct printing measures
if you are interested .. subscribe to channel for future video
for now is all ... thanks to gearbest for the present
see you next video
bye
-------------------------------------------
КАКОЙ ТЫ КРАСАВЧИК! ПОСМОТРИТЕ ВСЕ. WHAT YOU ARE VERY HANDSOME GUY! - Duration: 2:19.
For more infomation >> КАКОЙ ТЫ КРАСАВЧИК! ПОСМОТРИТЕ ВСЕ. WHAT YOU ARE VERY HANDSOME GUY! - Duration: 2:19. -------------------------------------------
What happens if you put Calcium Carbide into Coca Cola; Epic Fail - Duration: 2:49.
What's up everyone welcome back to my laboratory where safety is number one priority
kids do not try this at home
So today we're going to make Calcium Carbide with Coca Cola and some Sparkling Water
Ok! Let's check this out!
-------------------------------------------
what's making me happy this [ambiguous time frame] - Duration: 3:33.
Hello, so I love the idea of monthly favorites videos as a good sort of catch all place to just talk about stuff that you enjoy.
However, I know that the second I decide to commit to doing that,
I will get into, like, the second month of it and discover that I have lost all joy in life, and nothing has meaning,
or, more likely, I will just find that it is such a chore that it loses all of the magic that makes me wanna do it in the first place.
AND SO I have decided that I'm go with the format, but reframe it without any sort of time constraints.
So, like, I'm gonna do a thing now, and maybe I'll do it next month, or next week, or never again.
WHO KNOWS?
So today, here is a numbered, but not actually ranked list of things that have made me happy in some relatively recent amount of time.
First up – oh I should say that I am also doing this because a while back I made these numbers for a video –
uhh.. [shrug] but, you know, I have them now, so I have to become a person who makes list videos?
Anyway, FIRST UP is Glow.
I watched the whole show in an afternoon and it was just fun.
It's got some issues, but watching these women, both as characters and also the actors engaging in something that just appeared so joyful was a blast to watch.
It was a solid use of a few hours of my Saturday.
Most of the finale looked like it was just magical to be a part of.
And there are some really cool featurettes of the cast, like, behind the scenes, learning to do all of their stunts, and stuff...
Uhh, it's great.
It's a wonderful show about ladies wrestling on Netflix – I didn't tell you what it was first.
Now I did. OK great.
Second is So You Think You Can Dance, which is a reality show that is what it sounds like.
And I have not seen since coming to Missoula, but I used to watch it all the time.
And then I discovered that it is one of the great perks of my Hulu membership,
and now I'm just so happy that I get to watch talented people's dreams come true,
and hear awkward commentary from my reality TV parents,
and, like, occasionally cry at people's beautiful, emotional, moving backstories. It's great.
#3 is this incredible video that Taylor made,
which, someday I'm gonna have a list – a playlist – on my channel that's just me being all,
"So, Taylor made a great video, and, blah blah blah blah."
Um, but, so Taylor made a great video.
It's just a great video about our feelings and about how we devalue them and probably we shouldn't.
But it's told through the wonderful personal story, poignant message format that Taylor is so incredible at.
#4 is a fantastic video that Sophie made about putting her art up on her walls.
She's uncomfortable even calling it art at the beginning of the video, which is silly because it's great, and it is art,
but just this idea of creating things and surrounding yourself with those things,
and valuing the things that you are creating enough to do that is just inspiring and beautiful and made my day.
Finally, #5 is a glorious Game of Thrones version of the opening number from Hamilton.
I have not been able to get it out of my head and it makes me happy how freaking good it is,
and if you like Game of Thrones and also Hamilton, you should listen to it slash watch it.
OK THAT'S ALL. Tell me about good happy-making stuff, OK, BYE!
Không có nhận xét nào:
Đăng nhận xét