Youtube daily make Feb 5 2017

so what you do is put a dime in here so imma place it in here and now pull the side and

the tic tac should of came out which is right here

and then just shove this back in the machine,if your wondering i just got my money form here

and placed it back in,grab this piece here and place three slopes on it,should look like

this and go ahead and grab this 2 by 6 here and this piece going along to stick with it,then

what your going to do is put three slopes here as well

and connect the rest with bricks over here,alright once it looks like this go ahead and grab

your other piece and place it like that and then place these pieces on like that and then

like that make sure you make two of these,go ahead and grab this piece,grab this one by

four flat and place it in like this so if you look in the transparent part it should

be placed,now grab this place this right here and then flip this one upside down or sideways

so that your can place this piece like that alright now that your done with the coin bank

lets go make this piece here,so i just went ahead and grab a one by thrid and stacked

two one by ones on top like that,go ahead and grab this piece with two studs on the

side and place a flat on one of the sides so it should look like this and then go ahead

and place it on like that,so now i went ahead and grab this piece here and then placed a

one by one on top with a flat it should look like this and then it should be placing the

opposite direction the stud its coming out which means this is like that and this is

like that and finally imma place a slope on the side of the machine making sure it leaves

this gap in the corner here,so here i went ahead and put this in the middle,i made a

one by one with a slope on top placed it here and then i grabed a one by one with that coming

out and placed it on the opposite side of the stud coming out so it should look like

that and i placed it on the machine like this now we got to make one more final piece so

grab this piece with two studs coming out and place this in here and on the opposite

side i placed another then i got a one by thrid and place it on top like this and i

got this piece here and on the longer side i placed it right here,alright now its time

for the assembly,grab one of these here place it like that go ahead and place this piece

here on to the machine like that go ahead and place this inside,then place

this inside like that now grab this one by one with stud coming out on one side upside

and place it like this now that i placed it it looks tightly fit one of your final pieces

which is this and it should fit perfectly like that so that you can place this blue

stud down time for the final assembly put the other side of the piece on to here connecting

into these two studs and there you have it okay guys hope you guys enjoy this video it

is a honor to make a one by thrid baseplate lego candy machine the worlds smallest and

ya i guess ill see you guys later ya this is the one by thrid baseplate not even joking

alright bye!

For more infomation >> how to make a lego candy machine!(world record) - Duration: 6:45.

-------------------------------------------

Banana & Caramel Cake - How to make Nordic Food - Duration: 1:30.

No bake baking Banana och caramel cake

Crush the biscuits

Melt and add the butter

Make the bottom of the cake

Put in refrigerator for 3 - 4 hours

Pre boil the condenced milk before opening the can

Slice the bananas, thin slices

For more infomation >> Banana & Caramel Cake - How to make Nordic Food - Duration: 1:30.

-------------------------------------------

how to make a Lego sofa! - Duration: 1:49.

hello guys today we are going to be making my finest Lego couch so i grabbed a four by

four and a two by two and placed it down like this then i went ahead and grabbed these two

bricks here and placed it down like this so it should look like that then i went ahead

and grab this flat here and place one on both sides then i decided to grab a white slope

or flat or tile and placed it here where the gap is and then i grabbed a random colored

tile and placed it here and now for the back i went and grab more bricks then after i placed

it like this i grab two of these pieces right here and placed them like this on both opposite

sides then i grabbed this piece here and decided

to place it here then on the back i placed this bricks here don't mind the sticker

like so and the final step is i added this tile on to here like that hope you guys enjoy

this video on how to make a lego couch and um yea i'll see you next time peace out.

For more infomation >> how to make a Lego sofa! - Duration: 1:49.

-------------------------------------------

Funny videos Funny Videos Pranks Funny Videos compilation 2016-2017 - Duration: 15:02.

Funny videos 2017 funny videos 2016 funny vines try not to laugh or grin

Funny videos 2017 funny videos 2016 funny vines try not to laugh or grin

For more infomation >> Funny videos Funny Videos Pranks Funny Videos compilation 2016-2017 - Duration: 15:02.

-------------------------------------------

litterly a 10 second vid that took 1 hour to make - Duration: 0:13.

hai

this is mah first animation

lol

idk

howz ur dau

day*

stuped uto corect

i gud at spelling

ue

ye

i tots no english

woah

omg what a twist

pls subscribe

shout out to ur face

For more infomation >> litterly a 10 second vid that took 1 hour to make - Duration: 0:13.

-------------------------------------------

How to Make a Launchpad Cover (Part 5 - Final?): Multi-Sampling, Multi-Lights, & Random MIDI Effect - Duration: 10:01.

hello everybody my name is InspirAspir

and welcome back to part 5 of my launch

pad cover tutorial series in this video

we'll go over how to multi sample which

is assigning multiple sounds and samples

to a single button and we'll also go

over what exactly this random midi

effect does, now I don't imagine this

will take too much time

so let's go ahead and jump right into

it and get it done. To start, let's

pretend we want to we want to assign

multiple sounds to a single button so

maybe this button on the launchpad

and I'm going to be in page one and I

want this button so to do that it's

actually a lot easier than you would

think i would first go to my page one

and then i would go to the button that I

want. So I'm on page one, I'm pressing the

button that I want, and you can see down

here is that this button is lighting up.

Meaning this is the corresponding button

so i want to assign my samples to so now

i'm going to go to the top left of

Ableton, and click under instruments

and then drag in a new instrument

rack into that sample button but I chose

what this does is it creates an entire

rack of potential samples that we can

drop in that can be assigned to just

this button so let's go to my stem that

I covered in Part 2 and let's find some

sounds I want to have time to that

button so i have this layer of base

let's say for example of our players you

might not be able to hear much but I

promise that sounds coming through i can

hear it right now in my headphones

let's say that I want this sound

to play on this button so it's kind of

like I would any other sound let's say I

also want i don't know for example this

sound to play at the same time all I

would do is cut that up just like I

would for any other samples

maybe I also want to have this sound

this cymbal crash maybe I want that to

play at the same time again I would

split up just like any other sample now

if that's all that I want then I'm gonna

go back to my sample to go back to my

sample tracks and all i'm going to do is

drag in the samples into the instrument

rack i created before and then one thing

I recommend doing is clicking this

button to expand your instrument or

accuracy what samples you have included

and all i'm going to do is drag in all

of the samples now if I play this button

they all play which is nice so now

that's one really easy basic way to get

a bunch of sounds on one button but now

i'm gonna go over what's called multi

sampling which is where you can play

multiple sounds on a single button but

each time you press it a different

sample occurs so let's say I want to do

that on this button i'm actually gonna

use the same exact concept i'm going to

drag in my instrument rack onto the

given button i'm going to expand the

instrument rack and I'm just gonna

dragging whatever samples that I want

let's use these lead samples that i cut

up in part to just for the sake of

demonstration and i'm going to drag

these into my instrument rack right now

if I were to press this button i have a

feeling that sounds very bad because all

my samples are playing at the same time

which I don't want so to fix this i'm

gonna go over to my midi effects and put

in a random midi effect in front of my

instrument rack so I just click and drag

until a blue bar with the left of the

instrument rack and so what this random

many effect is going to let us do it's

going to allow us to cycle through all

of these samples so I'm going to up this

chance to a hundred percent i just

clicked and dragged up and then we want

the number of choices to be however my

samples we have

it looks like we have 16 samples i'm

going to change this number 26 auditors

click and type in the number and then

i'm going to change this mode to alt all

i did was i click that button once and

that will allow us to step through these

one at a time in order next I'm going to

click on my first sample and then click

Ally note and then double click this

green bar that quote unquote a science

this first example to the first touch of

the button then i'm going to press this

button again and you'll notice that

there's red bar moved one semitone to

the right of the green bar the way just

drawn in and that's because this random

the random devices doing its work so

while holding this going to double-click

the second sample and that assignment to

the second touch of the button then i'm

going to press it again notice the red

bar moved and i'm going to double-click

this third samples green bar and then

assigns it to the third touch the button

you can tell it's working when you can

see these green bars they're sort of

slanting down that means that you're

being assigned one after each other now

for us again and repeat the process all

the way down then what happens is each

time i press this button a different

sound will occur now one problem it's

already happening

one thing that just happened that you

might have noticed as these have become

out-of-tune whether pitches on all wonky

because moving these green bars

technically is moving its semitone up by

one think of this first sample as the

base and then every subsequent sample

after that is being moved up one

semitone into the pitch is being shifted

which we don't want in order to maintain

that sound all we do is go to each

sample after the first starting with the

second one

all we do is dragging a pitch mini

effect

onto that sample and we do that for all

of these i'm gonna go ahead and drag a

pitch on to each of these alright so I

just dragged a pitch many effect on to

every sample except for the first the

first doesn't need to be adjusted but

then we need to do is adjust to

counteract the semi tones and in order

to do that you just adjust the pitch of

your second sample down one semitone and

then for your third sample you just

knock that down two semitones and your

for three down three semitones and so on

so I just adjusted all of my sample

starting with my second each subsequent

sample you knocked down one more

semitone and that balancing each other

out so now if i press this button every

time i press this button a different

sound occurs and every sample is in tune

and in theory they don't have to all be

for example I use my lead kind of

violence since as an example you don't

have to make them all that I could have

thrown in

maybe as an example i can throw in a

picture on to replace my third button

press or something like that so right

now for the present one time to find the

third time are kicking sound and then

move on

so what I'm getting at here is you can

press a button multiple tired within any

given page impressive multiple styles

and have different sounds occur each

time and you can actually the same

concept for your lights midi track to

using this random effect if you go to

any light effect let's say I want to go

to page three and press I don't know

this button

ok I got a page three and my mini lights

effect i create a new chain i press this

button double click the green bar so not

only sign of these buttons if i were to

put in another midi effect racks on just

that button and then put a random device

in front of it then I can cycle through

multiple light effects for every time i

press this button if that makes any

sense

I'm gonna expand this manufacturer just

so i can see it up this chance two

hundred percent i'm gonna say i don't

know three different light effects just

for demonstration purposes you can go up

to 24 it looks like

the changes made to alternate and then

i'm going to create three new chains so

i press this button will put this cream

bar need to make two more and then I

just move each 11 after each other for

making a a diagonal line with the green

bars so now it doesn't look like much

but technically you can i press this

button into effect happens as you can

see so then within each of these chains

i could then make whatever I want maybe

like a mean my first effect could just

be a simple vertical bar maybe my second

effect could be of a pulsating effect

like this new my third effects can be a

different color just like that hopefully

get the concept of it basically for

either your samples or your lights if

you throw in an entire either instrument

lack for many effect racks respectively

and then if you put a random many

devices in front of it with an alternate

alternative modes with your number of

choices and you can cycle through any

number of effects or samples just like

here with my life I can have a pulsating

fact i press the same button never a

different color vertical bar that sort

of thing and this is all within one page

of course you can then do it in

different pages to so remember like this

is my samples on page 12 pressing the

same button i'm not changing pages and

we can actually pretty pretty versatile

can help you make some unique covers if

you want to have all of your drop sample

is located on one page

what you want to save some space and use

multiple buttons to have friends down

this is very useful so hopefully that

helps you out hopefully understood what

I was talking about not too complicated

once you get the hang of it it's pretty

much the same concept over and over and

over again so I think that'll do it

in fact i think that might wrap up this

tutorial series it's sort of tentative i

might be one more video I might not

we'll see for now this might be the end

but anyways thanks for watching I really

appreciate it you know i do and I will see you

all in the next video

For more infomation >> How to Make a Launchpad Cover (Part 5 - Final?): Multi-Sampling, Multi-Lights, & Random MIDI Effect - Duration: 10:01.

-------------------------------------------

Fudgy Brownie Recipe | How to make Brownies - Duration: 5:02.

Decadently dense, rich, chocolatey, chewy and fudgy with the most importantly crinkly

crackly tops.

You need to give this brownie recipe a try.

To make the best tasting brownies you need a lot of good quality chocolate.

We're going to be adding cocoa powder as well but you want majority of the flavour

to come from actual chocolate.

I'm using dark chocolate, about 50% cocoa solids for the best flavour.

Cut it or break it up into small pieces and add to a medium sized heat proof bowl.

You'll notice these brownies contain a lot of chocolate, a lot of butter, and a lot of

eggs.

They're super indulgent and great special occasions.

Although, if you are looking for something a little less indulgent I have a recipe for

brownies which use apple puree instead of butter and eggs on my website.

I'll have it linked below.

If you would like the full recipe for these brownies it will be on my website as well

as the full measurements in the information box below.

To the chocolate we're also going to add butter, about 2 sticks or a cup.

Cut the butter into pieces so it will melt easier and add to the bowl with the chocolate.

Place the bowl over a saucepan of simmering water, making sure the water doesn't touch

the bowl.

This is called a bain-marie or a water bath, a popular technique to melt chocolate.

The steam is trapped in between the saucepan and the bottom of the bowl, the heat is very

indirect and gentle so there is less chance of burning the chocolate.

Leave the chocolate and butter to melt gently for about 5 minutes, stirring occasionally

until it is smooth and glossy.

While the chocolate and butter is melting get started on measuring out the dry ingredients.

There are only a few, all purpose flour, a pinch of salt, and cocoa powder.

Brownies don't need a rising agent like baking powder or baking soda as they use eggs

to rise which will be added later.

This recipe only requires a cup of flour as these brownies are very fudgy and rich.

There are quite a few different types of brownies, all depending on the ratio of chocolate, butter,

eggs and flour added.

More cake like brownies use less chocolate, butter and eggs but more flour and chewy are

somewhere in between.

Measure out the dry ingredients and add to a small bowl.

Use a spoon to mix the ingredients to combine.

Once the chocolate and butter have completely melted remove the bowl from the heat.

Measure out 2 cups of white sugar and add to the bowl.

Stir to combine until there are no longer any lumps of sugar.

Adding the sugar now helps to dissolve it with the heat while also cooling the mixture

down to room temperature.

In a large mixing bowl crack in the eggs, you'll need 5 good quality medium sized

free range eggs.

Use a whisk to beat the eggs for about a minute or so until they become frothy.

This is the best technique for getting that crinkly crunchy top to the brownies.

The sugar and eggs create a meringue like texture on top while the brownies are baking,

so incorporating more air into the eggs just helps the top become thicker.

Once the eggs are frothy pour the chocolate mixture into the bowl and use the whisk to

combine.

Switch to a spatula and sprinkle over the dry ingredients.

Fold the brownie batter together until there are no longer any lumps and it becomes shiny,

be careful not to over mix as this will result in tough brownies.

Pour the brownie batter into a lined and greased tin and place into the oven to bake for about

30-40 minutes.

To check if your brownies are done test with a toothpick, there should be crumbs sticking

to it but not raw batter.

Remove the brownies from the oven and cool completely in the tin before slicing.

Let me know if you give these brownies a try, I would love to see a picture.

Thank you for watching, I hope you enjoyed this recipe and I'll see you in my next

video.

Bye.

For more infomation >> Fudgy Brownie Recipe | How to make Brownies - Duration: 5:02.

-------------------------------------------

TRYING TO MAKE: EXO DOLL BENTO (Eng CC) - Duration: 7:14.

hi, welcomeback to exodollina channel

today we will make video about making Bento

here we have the ingredients

this is noodle (mie goreng)

nori

and this we have steamed broccoli, sauteed carrots, egg rolls and sausage

and for the rice we mix with fried egg

steam broccoli about 1 minute

stir fry carrots + salt, chili powder and soy sauce

egg + salt

steam the sausage

yeay! baekku bento is done

so now we will eat it, yeay

baekku *crying*

yummy!

thats it video for today, maybe can usefull for making it in your home

this is so simple and yummy

thank you for watching :)

For more infomation >> TRYING TO MAKE: EXO DOLL BENTO (Eng CC) - Duration: 7:14.

-------------------------------------------

How Can Make 8 Ball Pool Trainer || 8 Ball Pool Trainer Maker || Tutorial 2017 - Duration: 7:06.

How Can Make Hack OF 8 Ball POOL

rajalilionc.blogsot.com

How Can Make Tariner for 8 Ball Pool

rajalionc.blospot.com

8 Ball Pool Tricks 2017

For more infomation >> How Can Make 8 Ball Pool Trainer || 8 Ball Pool Trainer Maker || Tutorial 2017 - Duration: 7:06.

-------------------------------------------

How To Make Good Sex To Please A Woman - Duration: 3:01.

For more infomation >> How To Make Good Sex To Please A Woman - Duration: 3:01.

-------------------------------------------

How to make crispy chicken fry!!!simple and easy fry - Duration: 8:11.

Today i am showing you how to make chicken fry

Half kilo chicken

Red chilli powder 2 teaspoon

Black pepper powder 1 teaspoon

Coriander Powder 1 teaspoon

Garam Masala 1 teaspoon

Turmeric Powder half teaspoon

Tandoori chicken Masala powder 1 and half teaspoon

Curry leaves

Coriander leaves

Green chillies 2 or 3

Ginger Garlic paste 3 teaspoon

Lemon juice of one lemon

Chickpea flour or besan 3 teaspoon

Corn flour 4 teaspoon

Baking soda or Sodium bicarbonate

Salt according to taste

Mix all ingredients in the chicken and marinate for one hour in refrigerator

Heat nearly two cups of oil

Fry the chicken pieces in this oil after heating it

Do not low the flame completely let it be from medium to high

Crispy chicken is ready to plate

Crispy outside and soft inside

Zaid enjoying the tasty chicken

This is the way to make chicken fry

PLEASE SUBSCRIBE , LIKE AND SHARE

THANK YOU

For more infomation >> How to make crispy chicken fry!!!simple and easy fry - Duration: 8:11.

-------------------------------------------

طرز تهیه شیشلیک شاندیز | How to make shishlik shandiz - Duration: 14:31.

www.aminvalizadeh.com

www.aminvalizadeh.com

Please subscribe

For more infomation >> طرز تهیه شیشلیک شاندیز | How to make shishlik shandiz - Duration: 14:31.

-------------------------------------------

HOW TO MAKE YOUR PC FASTER - Duration: 4:34.

HEY GUYS! ITS MY FIRST VIDEO

AND IM GOING TO TELL YOU

HOW TO MAKE YOUR PC FASTER WITH EASY 4 STEPS!!

SO FIRST

CLICK ON WINDOWS TAB AND SEARCH "RUN"

NOW SEARCH "TEMP"

AND SELET ALL THESE FILES

DONY WORRY IT WONT DELETE YOUR IMPORTANT FILES!

IT WILL ONLY DELETE WASTE FILES WHICH SLOW UP YOUR PC

IT WILL TAKE A WHILE

NOW CLOSE WINDOW AND SEARCH RUN AGAIN

NOW THIS TIME YOU HAVE TO SEARCH " %TEMP "

AND DO THE SAME

DELETE ALL THESE FILES

PRESS SKIP IF ANY FILE REMAIN

NOW SEARCH RUN AGAIN

THIS TIME YOU HAVE TO SEARCH " PREFETCH"

PRESS CONTINUE

DELETE ALL FILES !

NOW CLICK ON COMPUTER AT THE TOP OF THE SCREEN

OPEN IT

NOW PRESS RIGHT CLICK ON LOCAL DISK "C"

GO TO PROPERTIES

PRESS DISK CLEANUP

IT WILL TAKE 2-3 MINS TO ANALYSE THE SYSTEM CATCH OR WASTE FILES

NOW TICK ALL THE FILES AND LEAVE THE FILES YOU DONT WANT TO DELETE

AS I LEAVE GAME CATCH

ITS 100% SAFE SO DONT WORRY

IT WONT DELETE ANY OF YOUR IMPORTANT FILES SO RELAX

NOW PRESS DELETE FILES

NOW SIT BACK AND RELAX

PRESS CONTINUE

NOW CHECK YOUR COMPUTER SPEED NOW

SEE HOW FAST IT WORKS

SEE HOW FAST WINDOWS ARE OPENING !!

PLEASE SUBSCRIBE IF IT HELP YOU

COMMENT IF YOU HAVE ANY PROBLEM

SUGGEST ME A TOPIC TO MAKE VIDEO ON

THANKS !!!!!

For more infomation >> HOW TO MAKE YOUR PC FASTER - Duration: 4:34.

-------------------------------------------

How to make simple Fire in Unity - particle system - Duration: 1:50.

Hey everyone today im going to show you how to make fire in unity3d using particle system

So lets get started go to GameObject and add a Particle System

Place it anywhere you want

set the start speed to one and the color to orange

click on shape make sure its ticked

and set the angle to zero and the radius to point .2

now lets add our texture you can get it from google by searching " FireTexture for particle "

simply drag your texture to particle...

if you are seeing the black background dont worry just change the shader to additive or for clear fire select additive (soft)

to make the top of our fire little smaller in "size over lifetime" drag the red dot down

fire is done now lets add the light by going to gameobject and selecing light and adding a point light

make point light a child of particle system and set the position x and z to zero and y to 0 or 2 and select yellow or orange color

increase the intensity

thats it thanks for watching.

SUBSCRIBE

For more infomation >> How to make simple Fire in Unity - particle system - Duration: 1:50.

-------------------------------------------

How to Make DIY Spiral Tornado Potato Chips at Home Without Machine - Spiral Tornado Potato Hack - Duration: 3:39.

how to make spiral potato chips at home

how to make tornado potato chips at home

diy spiral potato cips at home

diy tornado portato at home

also known as spiral potato

tornado potato

chip on a stick

twisted potatoes

twister potato

curly fries

we are going to make

without any machine

simple method

we'll need potato and a skew

we need slicer or chopper

an old model will also work

just rotate as hard as you can

so that the potato will not break

slowly spread the potato

our spiral potato

tornado potato

is ready

as good as the machine made

spiral potato life hack

how to make spiral potato at home

how to make tornado potato at home

spiral potatoes

tornado potato chips

curley fries

twisted potato chips

twister potato

chip on a stick

how to make chip on stick

For more infomation >> How to Make DIY Spiral Tornado Potato Chips at Home Without Machine - Spiral Tornado Potato Hack - Duration: 3:39.

-------------------------------------------

How to make Wireless earbuds - Duration: 0:55.

So today I'm going to be showing you how to make

Wireless Earbuds

So first You're gonna want to get yourself some

Earbuds

or

earphones

so it doesn't matter where you get them

I got mine from the dollar tree.

so first,

You wanna just

You don't have to be gentle.

Just rip it out of there.

So...

Yeah you got these.

So

First (second) you're gonna wanna take-

Your sissors

and you just gotta-

There you go.

Wireless earbuds.

For more infomation >> How to make Wireless earbuds - Duration: 0:55.

-------------------------------------------

Woodturning : Make a magic wand ! - Duration: 6:04.

Hello everyone !!!

this week i was prepare some cutting boards and some of the has some cracks

so i cut some strips from them

and i have the idea for something deferent this time

so lets start to make something crazy !

i put the wood on my small lathe and i make it round for the beginning !

i use a spindle roughing gouge 12 mm for the work

i can see some cracks that before was hiding in the wood

because of them maybe will break but if we don't try it we never know !!!

then i start to work with 16mm skew chisel

the vibration in the centrer

always are more then the to ends

the moves that we make with the chisel must be with no power one the wood

if we give power on the wood because of crack maybe will break !!!

here is the crack

and make the work harder !

so i work slowly slowly !!

i decorated with some black lines to give a bit of contrast

and with a parting tool i mark some more

i think my same are ok

now i need to sanding until 400

then i put some decorations with the decorating elf

and then i finished

180

220

240

320

this piece have great colour !!! and this make me happy !

now i make some details with decorating elf

this time i have choose the straight bit

the first detail are ready and now i make the second

i mark with the pen to see the the boards of its shape

then i use the parting tool to make the boards

then just a bit of 320 sanding and just a bit with the burnishing brash

i need to renew the burning lines

400 grit

600 grit

800 grit

and now the harder part LOL

refine the edges

my wand are ready to make magic spells

but before this video ends i will need something more

so lets make it

cutting a base from an other left over

then sanding

100 and 320 grit

then i need 2 little pieces of wood for making a stand

then i drill it with 20mm drill

and cutting at the middle of the circle

i round a bit the edges to be more beautiful

and now is the time to glue them on the base

and oil a bit the all stand

looks nice !!!!!

my magic wand is ready

here it is

and now i will try it if is work

i will transform this piece of wood to one more wand

Abra cataba LOL

is ready the new wand and mine works perfect

no i will try to clean the workshop

1....2....3..... clean

everything perfect

i hope you enjoy it

and you make also a magic wand to clean your workshop

we will speak again next sunday !! until then take care !!!!

Disappear

For more infomation >> Woodturning : Make a magic wand ! - Duration: 6:04.

-------------------------------------------

How to make up to 10,000$ mounthly - eToro - Duration: 1:16.

For more infomation >> How to make up to 10,000$ mounthly - eToro - Duration: 1:16.

-------------------------------------------

DIY Valentines Candle - Duration: 5:42.

my channel Lime DIY and today I'm

so excited to be back with you guys once

again and before the Valentine's Day

started again why not create some

DIY stuff related to valentines and it's

turn out amazing but it's quite a little

problem doing that but I'll tell you

what is going to be today we can make

this little cutie candle

it's actually smell like lemon

because i put an extract in it

lemon extract that far as much good

it's a candor and amazing so we want to

know how to make it

let's get started here as well as a one

BD can take down the description box

below for all the little person to be

going to nap and a frying pan a can do

any color you like but i prefer why a

Shirley glass and also in 1000 extract

you can use any flavor you like and the

smell will be like what is this the

first thing first weekend and our candor

and the things that we really needed

right now is that thing inside the kendo

so you gotta practice the wac into

little pieces and pull it out and you

will get that little thing inside bring

the wax to the melt until it completely

dissolves and mel test this case during

and trust me this value into hardened

very fast so get you

up down quickly after we bring out some

just self just get throwing and make

sure you pretty fast but pretty fast and

we have to put the accents or the

abstract that we already choosing and

put a lot out of it we can use any

flavor of sense that you can find i

decide to use a lemon cuz im so fast

limited and a woman who loves to be like

what it is and make sure you were

created flash one again especially in

the room temperature so after then we're

gonna bring your shorty glasses and that

thing inside that candor I I don't know

what if we pull that but I call that

thingy and if that make anything suit

guy and acknowledges forgive me

you can use a hot good at this point you

can use a hot glue gun and I need to

secure the that little string inside

they are surely glass but it's okay not

too and pulls the wax in and you

basically can see how that's getting

cool so fast on the mixing bowl so do

not really your hand like what I did

because it's definitely gone through all

i would put the whole part of twice and

it again the result what you see on the

thumbnail so definitely lady ridiculous

but I learned the lesson so I've been to

a pencil or up and whatever that can

hold that string in plate in the middle

because you wanted to be exactly in the

middle at the same time you don't want

to mess up and side your back because

it's going to go off like a curly things

inside I really hard to tell you guys

what I really meant but hope you

understand

so hold it and played like 30 seconds to

a minute or until it turned a little

whiter and that is the sign that he can

release your hand because you wanted to

get a bit hardened a bit harder and so

let's so you can actually believe your

hand and put it anywhere to make it

coming

they've done so it pays a lot of hard

work to do this but so if you want to

get a plastic result you can get a hot

i'm in a cold water and put the candle

inside but if you want to wait a little

longer you can actually put in anywhere

refrigerator right now you have to trim

that bring it all my belt what in the

world is this what so you have to trim

and off and you're good to go

so to make it even cuter and as such he

is a sharpie and do a little hard on top

and all my god guys this is amazing and

smart so good and make sure to try it

and I cannot wait to see your creation

alright guys thanks for watching and if

you liked that

be advised although we gotta give you a

big thumbs up below and find anywhere

that this coming weekend off and I'll

catch you guys next week switch up that

are

I

For more infomation >> DIY Valentines Candle - Duration: 5:42.

-------------------------------------------

How To Make Your Android Look Like Nokia 6 | No Root | Hindi Tutorial - Duration: 3:23.

Thanks For Watching